BAT脚本实现自动IP地址切换？（bat脚本控制鼠标移动）新鲜出炉

93 0 0

@echo off
color 3f
mode con cols=80 lines=30
title 自动IP地址切换脚本 By 小强
if “%1″==”1” goto office
if “%1″==”2” goto Home
if “%1″==”3” goto dhcp
:start
cls
echo=echo============================================================================echo=echo 1.切换到办公室IP
echo=echo 2.切换到家里的IP
echo=echo 3.切换到自动获取
echo=echo 0.退·出·脚·本
echo=echo============================================================================echo=set choice=set /p choice=请输入你的选择：
if “%choice%”==”1” goto office
if “%choice%”==”2” goto Home
if “%choice%”==”3” goto dhcp
if “%choice%”==”0″ exit
echo 输入有误，请重新选择！
pause>nul
goto start

:office
cls
cls
echo.
echo 正在设置IP为办公IP请等待…
echo.
set net_interface=”本地连接”
echo 设置IP中…
netsh interface ip set address “%net_interface%” source=static addr=192.168.0.5 mask=255.255.255.0
echo 设置IP成功…设置网关中…
netsh interface ip set address name=”%net_interface%” gateway=192.168.0.1 gwmetric=1
echo 设置网关成功…设置DNS中…
netsh interface ip set dns “%net_interface%” static 202.98.0.68
netsh interface ip add dns “%net_interface%” 202.98.5.68 index=2
echo IP已成功切换到办公设置,任意键返回…
pause>nul
goto start

:home
cls
echo.
echo 正在设置为家用IP请等待…
echo.
set net_interface=”本地连接”
echo 设置IP中…
netsh interface ip set address “%net_interface%” source=static addr=192.168.1.111 mask=255.255.255.0
echo 设置IP成功…设置网关中…
netsh interface ip set address name=”%net_interface%” gateway=192.168.1.1 gwmetric=1
echo 设置网关成功…设置DNS中…
netsh interface ip set dns “%net_interface%” static 218.85.152.99
netsh interface ip add dns “%net_interface%” 218.85.157.99 index=2
echo IP已成功切换到办公设置,任意键返回…
pause>nul
goto start

:DHCP
echo.
echo 正在设置IP为自动获取,请等待…
echo.
set net_interface=”本地连接”
echo 设置IP中…
netsh interface ip set address name=”%net_interface%” source=dhcp
echo 设置网关成功…设置DNS中…
netsh interface ip set dns “%net_interface%” source=dhcp
echo 设置成功！按任意键返回选择菜单。
pause>nul
GOTO start

# 随心笔谈